• 0531-88785270

  • 山东英旭环保科技有限公司
    全国咨询热线
联系我们
免费热线
0531-88785270
网址:www.sdyingxu.com
邮箱: yingxu1881@163.com
济南办事处地址:济南市高新区舜泰广场6号楼1502
厂区地址:山东商河经济开发区汇源街66号
当前位置:首页 > 行业新闻 > 详细内容

预防防火保温板外墙脱落的措施

来源:http://www.sdyingxu.com/news/57.html 发布时间:2017-05-05

1.保温板与保温板间隙用泡沫填塞,不得用抹面胶浆填塞缝隙。
1 insulation board and the insulating plate gap with foam packing, do not use mortar caulk.
2.保温板消费后,必需抵达足够的陈(熟)化试件,保证外墙防火保温板材稳定、不变形是最基本条件,否则再好粘结胶及配套材料也难以运用,暂时粘锚后日后也会变形、降低粘结强度。
2 insulation board after consumption, must reach enough Chen (cooked) of the specimen, ensure the external wall insulation board, stable deformation is the most basic condition, or a good adhesive and supporting materials are difficult to use, after the day after the temporary anchoring bond will reduce the bond strength and deformation.
3.保温板材必需抵达陈化期,且板材粘结剂网格布、锚栓规格、数量安装按设计恳求选用。
3 insulation board must reach ageing, and the plate binder mesh, anchor bolts installed according to the design specifications, the number of selected begged.
4.粘贴板材的基层应坚固、平整、单调和干净,粘贴板材应稍加用力。
4 paste the base plate should be strong, flat, monotonous and clean, paste plate should be slightly hard.
5.基层湿度大应涂刷防湿底漆,保证基层单调、环境温度契合施工条件。
5 large humidity should be painted wet primer to ensure the monotony of the grassroots, environmental temperature and construction conditions.
6.必需保证胶粘剂质量,且粘结面积应≥40%。锚栓规格、质量契合设计规则,根据建筑高度设置所用数量,锚固基层墙体深度应≥25㎜。
6 must ensure the quality of adhesive, and the bonding area should be greater than or equal to 40%. Anchor specifications, quality meets the design rules, according to the height of the building set number, anchorage depth should be greater than or equal to 25 mm base wall.
7.粘贴剂必需在有效时间内运用,超越运用期粘贴剂的严禁加水再用。
7 paste must be used within the effective time, beyond the use of paste is prohibited to add water reuse.
8.基层湿度大应涂刷封锁基层处置剂,采用点框粘贴法布胶。
8 basic humidity with blockade of grass-roots disposal agent, using box paste glue.

本文由GPES保温板生产厂家为您提供,我们的网站是:http://www.sdyingxu.com我们将以全心全意的热情为您提供更优质的服务,欢迎您的访问!

此文关键字GPES保温板生产厂家,
相关产品